TECHNICAL SPECIFICATIONS
Vibrator Motor	Externally lubricated
Lubrication	Lubricating Grease
Vibrator Motors	2800 rpm - 2 Pieces x 4 Kw bottom
Total energy power	20Kw

HYDRAULIC SPECIFICATIONS
Pump	50 lt / min.
Operating pressure	120 Bar
Hydraulic Oil Tank Capacity	250 lt
Hydraulic Motor	1400 rpm - 11 kw

PRODUCTION SPECIFICATIONS
Control Type	Semi-Automatic/Manual
Cycle Period	20-25 Seconds
Pallet Capacity	15 Pieces
Pallet Dimensions	92 cm x 92 cm
Mold Weight	700.- Kg
Bunker Volume	1.5 m³

MACHINE DIMENSIONS
Width	2.0 m
Height	2.8 m
Length	7,2 m
Machine Weight	8,5 ton

MACHINE OPERATING DIMENSIONS
Width	4 m
Height	5 m
Length	20 m

509 Semi-Automatic Single Line Concrete Paving Stone Machine; Semi-Automatic Operation with Hydraulic, Electric and Vibration system. The Machine produces 0,6 m² Interlocked Concrete Paving Stone, Concrete Block in each press. It is capable of producing variable number of Concrete Curbstone, Bims, Hollow Block, Rainwater Gutter units depending on their sizes.

Production consists of filling concrete into the molds, vibration and hydraulic pressing.

Production Period of 0,6m² concrete paving stone (cycle period) is average 20-25 seconds.

» It is a Semi-Automatic Machine that produces single line concrete units.
» The body of the Machine consists of 3 parts. Vibration Section, Fine Mortar Section and Coarse Mortar Section.
» There is a collector lift at the front of the machine for packing the products on top of each other. Packing of Interlocked Concrete Paving Stone, Concrete Block, Concrete Curbstone, Briquette, Bims, Hollow Block, Rainwater Gutter and Sloping Block may be done.
» Thanks to the rapid mold change, production can be made in various models of 50mm - 300mm high Locked Concrete Paving Stone, Concrete Block, Concrete Border, Briquette, Bims, Hollow Block, Rainfall Slope and Slope Stone.
» Production can be made in international standards thanks to high vibration compression.
» Vibration table consists of one piece. There are 2 motors on the table.
» Products used in the hydraulic unit comply with international standards.
» Has a problem-free and consistent operating system.
» Has long operating life due to strong body structure.

509 SEMI-AUTOMATIC CONCRETE PAVING STONE AND BLOCK MACHINE
» There are 2 mortar bunkers in the machine.
» The machine produces on a single level.
» The machine produces concrete with minimum 50mm and maximum 300 mm high.
» The machine produces 0,6m² paving stone on each press.