TECHNICAL SPECIFICATIONS
Vibrator Motor	Eviro Marka Vibromotor
Lubrication	Gresyağ
Vibrator Motors	3000 rpm - 4 Pieces x 3.3 Kw bottom 3000 rpm - 2 Pieces x 1.4 Kw top
Toplam Elektrik Gücü	130 Kw

HYDRAULIC SPECIFICATIONS
1.Hydraulic Motor	1400 rpm - 11 Kw
2.Hydraulic Motor	1400 rpm - 15 Kw
3.Hydraulic Motor	1400 rpm - 15 Kw
4.Hydraulic Motor	1400 rpm - 11 Kw
5- Circulation Motor	1400 rpm - 4 Kw
1.Pump	32 lt / min.
2.Pump	48 lt / min.
3.Pump	48 lt / min.
4.Pump	32 lt / min.
5.Circulation Pumpsı	70 lt / min.
Operating pressure	200 Bar
Hidrolik Yağ Kapasitesi	1200 lt.

PRODUCTION SPECIFICATIONS
Control Type	Automatic
Cycle Period	20-25 Seconds
Pallet Capacity	10 Pieces
Pallet Dimensions	115 cm x 150 cm
Mold Weight	1200. - Kg
Bunker Volume	1.6 m³

MACHINE DIMENSIONS
Width	2.4 m
Height	4.3 m
Length	30 m
Machine Weight	52 ton

MACHINE OPERATING DIMENSIONS
Width	12 m
Height	6 m
Length	37 m

2148 Full Automatic Single Line Concrete Paving Stone Machine; Full Automatic Operation with Hydraulic, Electric and Vibration system. The Machine produces 1m² Interlocked Concrete Paving Stone, Concrete Block in each press. It is capable of producing variable number of Concrete Curbstone, Bims, Hollow Block, Rainwater Gutter units depending on their sizes.

Production consists of filling concrete into the molds, vibration and hydraulic pressing.

Production Period of 1m² concrete paving stone (cycle period) is average 20-25 seconds.

» It is a Full-Automatic Machine that produces single line concrete units.
» The body of the Machine consists of 3 parts. Vibration Section, Fine Mortar Section and Coarse Mortar Section.
» There is a Collector Robot on the Machine for packing of products. The Robot is capable of turning 180°. Packing of all kinds of; Interlocked Concrete Paving Stone, Concrete Block, Concrete Curbstone, Briquette, Bims, Hollow Block, Rainwater Gutter and Sloping Block may be done.
» Thanks to the rapid mold change, production can be made in various models of 60mm - 300mm high Locked Concrete Paving Stone, Concrete Block, Concrete Border, Briquette, Bims, Hollow Block, Rainfall Slope and Slope Stone.
» Production can be made in international standards thanks to high vibration compression.
» Vibration table consists of a single piece. There are 4 motors on the table. All vibrator motors are connected to each other, start and stop at the same time. Thus a high strength is ensured in the products.
» The machine body has single opening (front) feature thanks to the motors with reducers. In this way, mold change and the periodical maintenance is done in a short time without delay.
» The operator panel has an LCD display and the control of the machine is very practical and easy.
» All kinds of technical malfunctions, engine failures, sensor malfunctions and so on are detected from the operator panel.
» Products used in the hydraulic unit comply with international standards. Pumps used in the hydraulic unit are specified as plunger pumps.
» Has a problem-free and consistent operating system.
» Has long operating life due to strong body structure.

2148 FULL AUTOMATIC CONCRETE PAVING STONE AND BLOCK MACHINE
» There are 2 mortar bunkers in the machine.
» The machine produces double level paving stones.
» The machine produces concrete with minimum 60mm and maximum 300 mm high.
» The machine produces 1m² paving stone on each press.
» Mold changing is quick and easy on the machine.
» The machine has easy operation.