TECHNICAL SPECIFICATIONS
Vibrator Motor	Externally lubricated
Lubrication	Lubricating Grease
Vibrator Motors	2800 rpm - 4 Pieces x 4 Kw bottom 2800 rpm - 2 Pieces x 4 Kw top
Total energy power	75 Kw

HYDRAULIC SPECIFICATIONS
1.Hydraulic Motor	1400 rpm - 11 kw
2.Hydraulic Motor	1400 rpm - 15 kw
3.Hydraulic Motor	1400 rpm - 11 kw
4. Circulation Motor	1400 rpm - 4 Kw
1.Pump	32 lt / min.
2.Pump	48 lt / min.
3.Pump	32 lt / min.
4.Circulation Pump	50 lt / min.
Operating pressure	180 Bar
Hydraulic Oil Tank Capacity	600 lt

PRODUCTION SPECIFICATIONS
Control Type	Automatic
Cycle Period	27-35 Seconds
Pallet Capacity	15 Pieces
Pallet Dimensions	115 cm x 130 cm
Mold Weight	850. - Kg
Bunker Volume	1.6 m³

MACHINE DIMENSIONS
Width	2.4 m
Height	4.2 m
Length	17 m
Machine Weight	25 ton

MACHINE OPERATING DIMENSIONS
Width	8 m
Height	6 m
Length	2 7m

2098 Full Automatic Multi-line Concrete Paving Stone Machine; Full Automatic Operation with Hydraulic, Electric and Vibration system. The Machine produces 1m² Interlocked Concrete Paving Stone, Concrete Block in each press. It is capable of producing variable number of Concrete Curbstone, Bims, Hollow Block, Rainwater Gutter units depending on their sizes.

Production consists of filling concrete into the molds, vibration and hydraulic pressing.

Production Period of 1m² concrete paving stone (cycle period) is average 25-30 seconds.

» It is a Full-Automatic Machine that produces multi line concrete units.  Production is made in 8 lines on each pallet for 8 cm Concrete Paving Stone, in 10 lines on each pallet for 6 cm Concrete Paving Stone. Single line production is made for curbstones on each pallet.
» The body of the Machine consists of 3 parts. Vibration Section, Fine Mortar Section and Coarse Mortar Section.
» Thanks to the rapid mold change, production can be made in various models of 60mm - 300mm high Locked Concrete Paving Stone, Concrete Block, Concrete Border, Briquette, Bims, Hollow Block, Rainfall Slope and Slope Stone.
» Production can be made in international standards thanks to high vibration compression.
» Vibration table consists of two parts. There are 4 motors on the table.
» The machine body has single opening (front) feature thanks to the motors with reducers. In this way, mold change and the periodical maintenance is done in a short time without delay.
» The operator panel has an LCD display and the control of the machine is very practical and easy.
» All kinds of technical malfunctions, engine failures, sensor malfunctions and so on are detected from the operator panel.
» Products used in the hydraulic unit comply with international standards. Pumps used in the hydraulic unit are specified as plunger pumps.
» Has a problem-free and consistent operating system.
» Has long operating life due to strong body structure.

2098 FULL AUTOMATIC CONCRETE PAVING STONE AND BLOCK MACHINE
» There are 2 mortar bunkers in the machine.
» The machine produces on multi levels.
» The machine produces concrete with minimum 60mm and maximum 350 mm high.
» The machine produces 1m² paving stone on each press.